View UPC4072G2-A_8145494.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. bipolar analog integrated circuit pc4072 j-fet input low-noise dual operational amplifier data sheet document no. g15205ej6v0ds00 (6th edition) date published december 2007 ns printed in japan 1987 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. description the pc4072 is a j-fet input operational amplifier. this product is desi gned as low noise version of the pc4082. the features of the pc4072 are more improved input equivalent noise voltage, input offset voltage and input bias current than those of pc4082. by these features, the pc4072 is excellent choice for wide variety of applications including audio preamplifier and active filter. features ? low noise: e n = 17 nv/ hz (typ.) ? very low input bias and offset currents ? output short circuit protection ? high input impedance...j-fet input stage ? internal frequency compensation ? high slew rate...13 v/ s (typ.) ordering information part number package pc4072c 8-pin plastic dip (7.62 mm (300)) pc4072g2 8-pin plastic sop (5.72 mm (225)) equivalent circuit (1/2 circuit) pin configuration (top view) pc4072c, 4072g2 1 1 2 3 4 8 7 6 5 v + out 2 i i2 i n2 + ? 2 out 1 i i1 i n1 v ? + ? r 1 r 8 r 9 r 6 d 1 r 7 r 10 r 11 d 2 q 15 r 4 r 2 r 5 r 3 i i i n q 1 q 2 q 8 q 16 q 9 q 10 q 12 q 13 q 5 q 14 q 3 q 4 q 11 q 6 q 7 c 1 out v ? v +
data sheet g15205ej6v0ds 2 pc4072 absolute maximum ratings (t a = 25c) parameter symbol ratings unit voltage between v + and v ? note1 v + ? v ? ? 0.3 to + 36 v differential input voltage v id 30 v input voltage note2 v i v ? ? 0.3 to v + + 0.3 v output voltage note3 v o v ? ? 0.3 to v + + 0.3 v power dissipation c package note4 350 mw g2 package note5 p t 440 mw output short circuit duration note6 ts indefinite sec operating ambient temperature t a ? 20 to + 80 c storage temperature t stg ? 55 to + 125 c notes 1. reverse connection of supply voltage can cause destruction. 2. the input voltage should be allow ed to input without damage or destruc tion. even during the transition period of supply voltage, power on/off etc., this specification should be k ept. the normal operation will establish when the both inputs are within the common mode input voltage range of electrical characteristics. 3. this specification is t he voltage which should be allowed to supply to the output terminal from external without damage or destructive. even duri ng the transition period of supply voltage, power on/off etc., this specification should be kept. the output voltage of normal operation will be the output voltage swing of electrical characteristics. 4. thermal derating factor is ?5.0 mv/ c when operating ambient tem perature is higher than 55 c. 5. thermal derating factor is ?4.4 mv/ c when operating ambient tem perature is higher than 25 c. 6. pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, note 4 and note 5. recommended operating conditions parameter symbol min. typ. max. unit supply voltage v 5 16 v output current i o 10 ma capacitive load (a v = +1, r f = 0 ) c l 100 pf
data sheet g15205ej6v0ds 3 pc4072 electrical characteristics (t a = 25 c, v = 15 v) parameter symbol conditions min. typ. max. unit input offset voltage v io r s 50 3 10 mv input offset current note7 i io 5 50 pa input bias current note7 i b 30 200 pa large signal voltage gain a v r l 2 k , v o = 10 v 25000 200000 supply current note8 i cc i o = 0 a 4 5 ma common mode rejection ratio cmr 70 86 db supply voltage rejection ratio svr 70 86 db r l 10 k 12 13.5 v output voltage swing v om r l 2 k 10 12 v common model input voltage range v icm 10 v slew rate sr a v = + 1 13 v/ s unity gain frequency f unity 3 mhz input equivalent noise voltage v n r s = 100 , f = 10 hz to 10 khz 4 v r.m.s. input equivalent noise voltage density e n r s = 100 , f = 1 khz 17 nv/ hz channel separation 120 db input offset voltage v io r s 50 , t a = ? 20 to +70 c 13 mv average v io temperature drift v io / t t a = ? 20 to + 70 c 10 v/ c input offset current note7 i io t a = ? 20 to + 70 c 2 na input bias current note7 i b t a = ? 20 to + 70 c 7 na notes 7. input bias currents flow into ic. because each curr ents are gate leak current of p-channel j-fet on input stage. and that are temper ature sensitive. short ti me measuring method is recommendable to maintain the junction temperature close to t he operating ambient temperature. 8. this current flows irrespecti ve of the existence of use.
data sheet g15205ej6v0ds 4 pc4072 typical performance characteristics (t a = 25 c, typ.) 20 600 500 400 300 200 100 0 ? 5 ? 4 ? 3 ? 2 ? 1 0 0.01 0.1 1.0 10 100 1 2 3 4 5 0 20 40 60 80 100 120 10 20 ? 40 ? 20 0 20 t a - operating ambient temperature - c input offset voltage input bias current t a - operating ambient temperature - c 40 60 80 1 ? 200 20406080 100 10 k 1 m 1 k 10 100 k 10 m 40 60 80 100 r l = 10 k pc4072g2 pc4072c t a - operating ambient temperature - c v - supply voltage - v large signal frequency response output voltage swing f - frequency - hz power dissipation open loop frequency response p t - total power dissipation - mw v io - input offset voltage - mv a v - open loop voltage gain - db v om - output voltage swing - v p-p i b - input bias current - na v = 15 v r l = 2 k v = 15 v v = 15 v 200 c/w 227 c/w 40 0 30 20 10 0 10 20 30 100 1 k 10 k 100 k 1 m 10 m f - frequency - hz v om - output voltage swing - v p-p v= 15 v r l = 10 k v= 10 v v= 5 v each 5 samples data
data sheet g15205ej6v0ds 5 pc4072 v o - output voltage - v voltage follower pulse response t - time - s 0 ? 5 0 5 1 23 voltage density - nv/ hz e n - input equivalent noise input equivalent noise voltage density f - frequency - hz 10 10 10 10 10 1 100 1 k 10 k 100 k output voltage swing r l - load resistance - 0 300 1 k 10 k 10 20 30 r s = 100 v = 15 v v = 15 v a v = + 1 r l = 2 k c l = 100 pf v = 15 v 4 v i - input voltage - v / ? 5 0 5 100 3 k v om - output voltage swing - v p-p i cc - supply current - ma supply current v - supply voltage - v 5 0 0.5 1.0 1.5 2.0 2.5 10 15 20 4 3 2
data sheet g15205ej6v0ds 6 pc4072 package drawings (unit : mm) 14 85 item millimeters notes 1. each lead centerline is located within 0.25 mm of its true position (t.p.) at maximum material condition. p8c-100-300b,c-2 n 0.25 p 0.9 min. r0 15 a 10.16 max. b 1.27 max. f 1.4 min. g 3.2 0.3 j 5.08 max. k 7.62 (t.p.) c 2.54 (t.p.) d 0.50 0.10 h 0.51 min. i 4.31 max. l 6.4 m 0.25 + 0.10 ? 0.05 2. ltem "k" to center of leads when formed parallel. m a r m p i j h g f dn c b 8-pin plastic dip (7.62mm(300)) l k
data sheet g15205ej6v0ds 7 pc4072 item b c i 8-pin plastic sop (5.72 mm (225)) d e f g h j p millimeters 1.27 (t.p.) 0.78 max. 4.4 0.15 0.1 0.1 0.42 1.59 0.21 6.5 0.3 1.49 + 0.08 ? 0.07 1.1 0.2 3 + 7 ? 3 note each lead centerline is located within 0.12 mm of its true position (t.p.) at maximum material condition. a 5.2 + 0.17 ? 0.20 k l m n 0.6 0.2 0.17 0.12 0.10 + 0.08 ? 0.07 s8gm-50-225b-6 85 1 4 s m c detail of lead end a m s n f g b e d p h i j k l
data sheet g15205ej6v0ds 8 pc4072 recommended soldering conditions the pc4072 should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact an nec electronics sales representative. for technical information, see the following website. semiconductor device mount manual (http ://www.necel.com/pkg/en/mount/index.html) type of surface mount device pc4072g2: 8-pin plastic sop (5.72 mm (225)) process conditions symbol infrared ray reflow peak temperature: 230 c or below (package surface temperature), reflow time: 30 seconds or less (at 210 c or higher), maximum number of reflow processes: 1 time. ir30-00-1 vapor phase soldering peak temperature: 215 c or below (package surface temperature), reflow time: 40 seconds or less (at 200 c or higher), maximum number of reflow processes: 1 time. vp15-00-1 wave soldering solder temperature: 260 c or below, flow time: 10 seconds or less, maximum number of flow processes: 1 time, pre-heating temperature: 120 c or below (package surface temperature). ws60-00-1 partial heating method pin temperature: 300 c or below, heat time: 3 seconds or less (per each side of the device). ? caution apply only one kind of soldering condition to a device, except for "partial heating method", or the device will be damaged by heat stress. type of through-hole device pc4072c: 8-pin plastic dip (7.62 mm (300)) process conditions wave soldering (only to leads) solder temperature: 260 c or below, flow time: 10 seconds or less. partial heating method pin temperature: 300 c or below, heat time: 3 seconds or less (per each lead). caution for through-hole device, the wave soldering process must be app lied only to leads, and make sure that the package body does not get jet soldered. reference documents quality grades on nec semiconductor devices c11531e semiconductor device mount manual http:// www.necel.com/pkg/en/m ount/index.html nec semiconductor device reliability/ quality control system- standard linear ic iei-1212
pc4072 the information in this document is current as of december, 2007. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec e lectronics p roducts is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":

▲Up To Search▲

Price & Availability of UPC4072G2-A

	To Download UPC4072G2-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .